E-Power RS 160 Factory

Wheel Split

A corratec bike with Wheel Size Split performes a lot better in flowy trails which have a lot of turns. It is far easier to lay the bike over into the turns, there is more room to move around on the bike and the acceleration out of slow speed turns and situations is great. The smaller rear wheel is marginally more agile and precise on technical trails. On bigger jumps the 27.5 rear wheel gives a little more clearance and there is less risk of the mid air butt buzzing which is heavily unsettling. By the way a unique point of the wheel size split: The 27,5 bike also manuals a lot easier, picking the wheel up and holding it into a manual is easier than with a 29″ rear wheel.

Single Block construction

Improved power Dissipation in the context of a combination of downtube and engine mount. 

• Increased stiffness

• Lightyear construction

IET - Integrated Engine Technology

Constant improvement and desire for better design lead to an engine bracket forged out of high grade aluminium.

• Improved stability and stiffness by forged high grade aluminium
• Save connection between frame and engine
• Service- and maintenance friendly engine and battery position
• Protection from external forces
• Design-orientied Bosch integration concept
• Compatible with all Bosch drive units

For more Information click here.

THROUGH AXLE

Through-axles have the advantage that they are larger in diameter than conventional 9 mm axles and thus are significantly stiffer.

29" Wheel Size

Large wheels roll better. 29 inches require about eight percent less energy than the 26-inch version. The 29“ wheel takes longer to get going, but rolls easily and quickly over rocks and roots, which brings an additional advantage – more comfort.

Larger wheels roll over obstacles more easily. The ability of a wheel to roll over obstacles is proportional to its size. A 29" wheel, which is about 10% larger than a 26" wheel, can roll over 10% larger obstacles. The larger diameter wheels have more angular momentum so they lose less speed to obstacles and rough sections.

29" bikes tend to offer taller riders a more "natural" frame geometry.  

650B Wheel Size

650B wheel Size is the new MTB standard. The 650B wheel is not a compromise between 26“ and 29“. It combines the advantages of 26-inch models (weight, torsional stiffness and agility) with the advantages of the 29“ impeller (increased smoothness, rollover behavior, increased cornering stability).

BOOST-Standard

The BOOST standard offers new constructive freedom, but only for 29 ' and 650B Plus wheels. The rear wheel hub grows in its width from 142 to 148 mm. There is an increase of 100 to 110 mm in the front wheel hub. Therefore, in the frame with the BOOST standard, 27.5 rear wheels with plus tires can be fitted in addition to the usual 29er wheels. The crank also pushes 3mm outwards, which provides additional stability in the area of the bottom bracket and the larger chain length generally provides more space. This additional space, in the otherwise constantly cramped bottom bracket area, can be used to increase tire-freeness or create a stiffer rear body by using larger bearings.

• Wider rear and front hub.

• Stiffer wheels and more space in the bottom bracket area.

• Larger tire-free for Plus bikes.

Dropper Seatpost

Dropper Seatpost with control lever on the handlebar or seatpost.

INTERNAL CABLE ROUTING

Internal Cable Routing inside the frame for protection and a stylish design.